PMP9128 Datenblatt – Nvidia Tegra T40/T50 Processor

Teilenummer : PMP9128

Function : Small Form Factor Nvidia Tegra T40/T50 Processor Power Design for Automotive infotaionment

Package : Module Type

Hersteller : Texas Instruments

Image :

PMP9128 datenblatt

Beschreibung :

This Nvidia Tegra™ T40/T50 Processor Power Automotive Infotainment reference design powers the Nvidia Tegra T40/T50 Core Processor using the TPS51632Q1 and TPS51604Q1 Automotive Qualified Devices. It is targeted towards OEM or After-Market Infotainment Designs, including Rear Seat Entertainment.

  • 234mm2 of total power supply area (including input/output caps and inductor)
  • Only 10x22uF ceramic output caps to meet load transient requirements
  • 6V to 19V input support
  • Scalability with phase count optimization
  • ~ 87% peak efficiency at 1MHz switching frequency
  • Tight Output  Voltage Accuracy

Official Homepage :

Andere Datenblätter in der Datei : PMP9128

PMP9128 Datenblatt PDF Download

PMP9128 pdf


AD8197B Datenblatt – DMI/DVI Switch with Equalization

Teilenummer : AD8197B

Function : 4:1 HDMI/DVI Switch with Equalization

Package : 100-Lead LQFP Type

Hersteller : Analog Devices

Pinout :

AD8197B datenblatt

Beschreibung :

The AD8197B is an HDMI™/DVI switch featuring equalized TMDS® inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs.

The AD8197B offers individual control of the on/off state of the TMDS input termination resistors via I2C® control. Outputs can be set to a high impedance state to reduce the power dissipation and/or to allow the construction of larger arrays using the wire-OR technique. The AD8197B is provided in a 100-lead LQFP, Pb-free, surface
mount package, specified to operate over the −40°C to +85°Ctemperature range.


1. 4 inputs, 1 output HDMI/DVI links
2. Enables HDMI 1.3-compliant receiver
3. Pin-to-pin compatible with the AD8197A
4. 4 TMDS channels per link
5. Supports 250 Mbps to 2.25 Gbps data rates
6. Supports 25 MHz to 225 MHz pixel clocks
4. Equalized inputs allow use of long HDMI cables
(20 meters at 2.25 Gbps)
8. Fully buffered unidirectional inputs/outputs
9. Per input switchable, 50 Ω on-chip terminations
10. Switchable output 50 Ω on-chip terminations
11. Pre-emphasized outputs
12. Low added jitter
13. Single-supply operation (3.3 V)
14. 4 auxiliary channels per link
15. Bidirectional unbuffered inputs/outputs
16. Flexible supply operation (3.3 V to 5 V)
17. HDCP standard compatible
18. Allows switching of DDC bus and 2 additional signals
19. Output disable feature
20. Reduced power dissipation
21 .Removable output termination
22. Allows building of larger arrays
23. Two AD8197Bs support HDMI/DVI dual link
24. Standards compatible: HDMI receiver, HDCP, DVI
25. Serial (I2C slave) and parallel control interface
26. 100-lead, 14 mm × 14 mm LQFP, Pb-free package


1. Multiple input displays
2. Projectors
3. A/V receivers
4. Set-top boxes
5. Advanced television (HDTV) sets

Andere Datenblätter in der Datei : AD8197BASTZ, AD8197BASTZ-RL

AD8197B Datenblatt PDF Download

AD8197B pdf