AD8426 Datenblatt PDF ( Pinout, schematic )

Teilenummer : AD8426

Function : Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

Hersteller : Analog Devices

Pinout :

AD8426 datenblatt

Beschreibung :

The AD8426is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the signal to make full use of the supply rails. Because the input range can also go below the negative supply, small signals near ground can be amplified without requiring dual supplies. The AD8426operates on supplies ranging from ±1.35 V to ±18 V for dual supplies and 2.2 V to 36 V for a single supply.
The robust AD8426inputs are designed to connect to real world sensors. In addition to its wide operating range, the AD8426can handle voltages beyond the rails. For example, with a ±5 V supply, the part is guaranteed to withstand ±35 V at the input with no damage. Minimum and maximum input bias currents are specified to facilitate open-wire detection.

2 channels in a small, 4 mm × 4 mm LFCSP
LFCSP package has no metal pad
More routing room
No current leakage to pad
Gain set with 1 external resistor
Gain range: 1 to 1000
Input voltage goes below ground
Inputs protected beyond supplies
Very wide power supply range
Single supply: 2.2 V to 36 V
Dual supply: ±1.35 V to ±18 V
Bandwidth (G = 1): 1 MHz
CMRR (G = 1): 80 dB minimum
Input noise: 24 nV/√Hz
Typical supply current (per amplifier): 350 μA
Specified temperature range: −40°C to +125°C

Industrial process controls
Bridge amplifiers
Medical instrumentation
Portable data acquisition
Multichannel systems

+VS= +15 V, −VS= −15 V, VREF= 0 V, TA= 25°C, G = 1, RL= 10 kΩ, specifications referred to input, unless otherwise noted.

Datenblatt PDF Download

AD8426 pdf

Andere Datenblätter in der Datei :

This entry was posted in Allgemein. Bookmark the permalink.